Browsing Argo Community Practices by Subject "Data Management Practices::Data processing"
Now showing items 1-14 of 14
-
Argo Quality Control Manual for CTD and Trajectory Data, Version 3.1,16 January 2018. [SUPERSEDED by http://dx.doi.org/10.25607/OBP-426]
(IFREMER, 2018)A CTD (conductivity, temperature, depth) device measures temperature and salinity versus pressure. This document is the Argo quality control manual for CTD and trajectory data. It describes two levels of quality control: - ... -
Argo Quality Control Manual for CTD and Trajectory Data. Version 3.7.
(IFREMER, Brest, France, 2023)versus pressure. Trajectory data involve positions and time. This document is the Argo Quality Control Manual for CTD and Trajectory data. It describes two levels of quality control and adjustment procedures: • The first ... -
Argo User’s Manual Version 3.2, September 11th 2017.
(IFREMER, 2017)This document is the Argo data user’s manual. It contains the description of the formats and files produced by the Argo Data Assembly Centres (DACs). -
Argo User’s Manual Version 3.3, 22 November 2019.
(IFREMER, 2019)This document is the Argo data user’s manual. It contains the description of the formats and files produced by the Argo Data Assembly Centres (DACs). -
argoFloats: an R Package for Analyzing Argo Data.
(2021)An R package named argoFloats has been developed to facilitate identifying, downloading, caching, and analyzing oceanographic data collected by Argo profiling floats. The analysis phase benefits from close connections ... -
BGC-Argo synthetic profile file processing and format on Coriolis GDAC. Version 1.1
(Ifremer, Plouzane, France, 2019)The current V3.1 Argo netCDF format that produces a pair of core- and b- profile files per cycle, with N_PROF > 1, allows storage of all profile information returned from BGC floats, in a manner that is as close to float ... -
Bio-Argo quality control manual for Chlorophyll-A concentration. Version 1.0, December 17th 2014.
(IFREMER, 2014)This document is the Bio-Argo quality control manual for Chlorophyll A concentration. It describes the method used in real-time to apply quality control flags to Chlorophyll A concentration calculated from specific sensors ... -
Processing Argo oxygen data at the DAC level. Version 2.2. Octobre 22nd 2016. [SUPERSEDED by http://dx.doi.org/10.25607/OBP-117]
(IFREMER for Argo Data Management, Villefranche-sur-Mer, France, 2016)This document does NOT address the issue of oxygen data quality control (either real-time or delayed mode). As a preliminary step towards that goal, this document seeks to ensure that all countries deploying floats equipped ... -
Processing Argo oxygen data at the DAC level. Version 2.3.1, June 13th 2018.
(IFREMER for Argo Data Management, Villefranche-sur-Mer, France, 2018)This document does NOT address the issue of oxygen data quality control (either real-time or delayed mode). As a preliminary step towards that goal, this document seeks to ensure that all countries deploying floats equipped ... -
Processing BGC-Argo CDOM concentration at the DAC level. Version 1.0. October 10th 2017.
(IFREMER for Argo Data Management, Villefranche-sur-Mer, France, 2017)In the open ocean, Colored Dissolved Organic Matter (CDOM) is the fraction of the total Dissolved Organic Matter (DOM), composed by a mixture of chemically complex algal degradation products that interact with light. CDOM ... -
Processing BGC-Argo measurement timing information at the DAC level. Version 1.0, March 28th 2017.
(IFREMER for Argo Data Management, Villefranche-sur-Mer, France, 2017)Thermal lag or sensor time response corrections (e.g., [1]) require knowledge of the time of each individual sensor observation. In the Argo data system, the float's trajectory file is the natural place to put measurement ... -
Processing BGC-Argo Radiometric data at the DAC level. Version 1.1, October 9 th 2017.
(IFREMER for Argo Data Management, Villefranche-sur-Mer, France, 2017)Presently, radiometers can be implemented on profiling floats to estimate some radiometric measurements. Hereafter we briefly describe the principle of this method and several configurations of the OCR500 series instruments. ... -
Processing bio-Argo chlorophyll-A concentration at the DAC level. Version 1.0. 30 September 2015.
(IFREMER for Argo Data Management, Villefranche-sur-Mer, France, 2015)This document does NOT address the issue of chlorophyll-a quality control (either real-time or delayed mode). As a preliminary step towards that goal, this document seeks to ensure that all countries deploying floats ... -
Processing Bio-Argo nitrate concentration at the DAC Level. Version 1.1, March 3rd 2018.
(IFREMER for Argo Data Management, Villefranche-sur-Mer, France, 2018)The only method used to date to measure dissolved nitrate concentration (NITRATE) with sensors mounted on profiling floats is based on the absorption of light at ultraviolet wavelengths by nitrate ion (Johnson and Coletti, ...