Show simple item record

dc.date.accessioned2024-06-17T13:42:35Z
dc.date.available2024-06-17T13:42:35Z
dc.date.issued2007
dc.identifier.citationInternational Organization for Standardization (2007) ISO 10304-1:2007. Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate. [Reviewed 2021]. Geneva, Switzerland, International Organization for Standardization (ISO). Available: https://www.iso.org/standard/46004.htmlen_US
dc.identifier.urihttps://repository.oceanbestpractices.org/handle/11329/2509
dc.description.abstractThe user should be aware that particular problems could require the specification of additional conditions not provided for in this part of ISO 10304. WARNING — Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. IMPORTANT — It is absolutely essential that tests conducted according to this International Standard be carried out by suitably trained staff. 1 Scope This part of ISO 10304 specifies a method for the determination of dissolved bromide, chloride, fluoride, nitrate, nitrite, orthophosphate and sulfate in water, e.g. drinking water, ground water, surface water, waste water, leachates and marine water by liquid chromatography of ions. The lower limit of application is ≥ 0,05 mg/l for bromide and for nitrite, and ≥ 0,1 mg/l for chloride, fluoride, nitrate, orthophosphate, and sulfate. The lower limit of application depends on the matrix and the interferences encountered. The working range may be expanded to lower concentrations (e.g. ≥ 0,01 mg/l) if an appropriate pre-treatment of the sample (e.g. conditions for trace analyses, pre-concentration technique) is applied, and/or if an ultraviolet (UV) detector (for bromide, nitrate and nitrite) is used.en_US
dc.language.isoenen_US
dc.publisherInternational Organization for Standardization (ISO)en_US
dc.relation.ispartofseriesISO;10304-1:2007
dc.subject.otherDissolved bromideen_US
dc.subject.otherDissolved chlorideen_US
dc.subject.otherDissolved fluorideen_US
dc.subject.otherDissolved nitrateen_US
dc.subject.otherDissolved nitriteen_US
dc.subject.otherDissolved orthophosphateen_US
dc.subject.otherDissolved sulfateen_US
dc.subject.otherISO Standard
dc.titleISO 10304-1:2007. Water quality — Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate. Edition 2. [Reviewed 2021].en_US
dc.typeReporten_US
dc.description.statusPublisheden_US
dc.contributor.corpauthorInternational Organization for Standardization (ISO)en_US
dc.description.notes,en_US
dc.description.refereedRefereeden_US
dc.publisher.placeGeneva, Switzerlanden_US
dc.subject.parameterDisciplineOther inorganic chemical measurementsen_US
dc.subject.parameterDisciplineNutrientsen_US
dc.subject.dmProcessesData acquisitionen_US
dc.subject.dmProcessesData analysisen_US
dc.description.currentstatusCurrenten_US
dc.date.review2021
dc.description.sdg14.aen_US
dc.description.eovNutrientsen_US
dc.description.maturitylevelMatureen_US
dc.description.adoptionValidated (tested by third parties)en_US
dc.description.adoptionMulti-organisationalen_US
dc.description.adoptionInternationalen_US
dc.description.methodologyTypeGuidelines & Policiesen_US
dc.description.methodologyTypeMethoden_US
dc.description.methodologyTypeSpecification of criteriaen_US
obps.endorsementExternal.externalEndorsedByISO
obps.contact.contactemailcustomerservice@iso.org
obps.resourceurl.publisherhttps://www.iso.org/standard/46004.html


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record