dc.contributor.author | Smith, Shawn R. | |
dc.contributor.author | Forcucci, Dave | |
dc.contributor.author | Goes, Joaquim | |
dc.contributor.author | Hudak, Rebecca | |
dc.contributor.author | Mishonov, Alexey | |
dc.contributor.author | Stolp, Laura | |
dc.contributor.author | Watkins-Brandt, Katie | |
dc.date.accessioned | 2020-04-14T13:26:33Z | |
dc.date.available | 2020-04-14T13:26:33Z | |
dc.date.issued | 2020 | |
dc.identifier.citation | Smith, S.R., Forcucci, D.; Goes, J.; Hudak, R.; Mishonov, A.; Stolp, L. and Watkins-Brandt, K. (2020) Best Practices for Shipboard Underway Transmissometers. Version 1. Tallahassee, FL, Florida State University Center for Ocean-Atmospheric Prediction Studies, 13pp. DOI: 10.25607/OBP-790 | en_US |
dc.identifier.uri | http://hdl.handle.net/11329/1275 | |
dc.identifier.uri | http://dx.doi.org/10.25607/OBP-790 | |
dc.description.abstract | This best practice document was developed under the Rolling Deck to Repository
project by a small working group comprised of the document authors. These
recommendations are specifically for transmissometers installed within a research
vessel’s (RVs) scientific flow-through sea water (underway) system. They are not
focused on transmissometers used for CTD/Rosette casts, though some information
may be applicable. All underway transmissometers in the academic research fleet
presently are WET Labs (henceforth Sea-Bird) C-Stars. Review of available sensors
shows this will continue to be the most available and adaptive device.
The Goal of this document is to provide best practices for operators that will improve
access to transmissometer data and metadata to support routine data quality evaluation
and science application. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Florida State University, Center for Ocean-Atmospheric Prediction Studies | en_US |
dc.subject.other | Shipboard underway transmissometers | en_US |
dc.subject.other | R2R | en_US |
dc.subject.other | Transmissometer | |
dc.subject.other | Research Vessels | |
dc.subject.other | WetLabs C-Star | |
dc.subject.other | Transmittence Ratio | |
dc.subject.other | Beam Attenuation | |
dc.subject.other | Cleaning | |
dc.subject.other | Calibration | |
dc.subject.other | Installation | |
dc.title | Best Practices for Shipboard Underway Transmissometers. Version 1. | en_US |
dc.type | Report | en_US |
dc.description.status | Published | en_US |
dc.format.pages | 13pp. | en_US |
dc.description.refereed | Refereed | en_US |
dc.publisher.place | Tallahassee, FL | en_US |
dc.subject.parameterDiscipline | Parameter Discipline::Physical oceanography | en_US |
dc.subject.instrumentType | Instrument Type Vocabulary::transmissometers | en_US |
dc.subject.dmProcesses | Data quality control | |
dc.subject.dmProcesses | Metadata management | |
dc.description.currentstatus | Current | en_US |
dc.description.sdg | 14.A | en_US |
dc.description.maturitylevel | TRL 9 Actual system "mission proven" through successful mission operations (ground or space) | en_US |
dc.description.bptype | Best Practice | en_US |
dc.description.bptype | Manual (incl. handbook, guide, cookbook etc) | en_US |
obps.contact.contactemail | srsmith@fsu.edu | |